TDS-100H Handhold ultrasonic flowmeter
TDS-100H is widely used to measure liquid flow in various industries thanks to its advantages such as smart body, high accuracy, good repeatability,long-running cell,easy operation, built-in printer etc. The flowmeter is very popular in industry like petrochemical, water, power, energy monitoring etc.
It's exported to Italy, Japan, Korea, Australia, America etc.
Features:
- Accuracy: +/-1%Fs
-Output of direct current signal: 4 - 20mA, impedance not more than 600 ohm
-Medium temperature: -20 ~ +150C
-Pulse output accumulative flow: Light isolation, collector, emitter open circuit passive output, pulse width 2ms
-Serial communication: RS485 or RS232 (opt)
-State of fluid: Full-pipe: Axis symmetry
-Power: 220V+/-10% AC 50Hz
-100V-240VAC for the charger
-Printer: (Opt. ) TpP-16 mini-printer
-Environment temperature: -10 ~ +45
- Environment humidity: Relative humidity not more than 85%
-Transducers Clamp on type transducers
-Transducer Cord Length Standard 2x10 meters, optional 2x 500 meters
-Data Logger Built-in data logger can store over 2000 lines of data
Sensor | S1Z | M1Z | S1 | M1 | L1 | S1H | M1H |
Pipe size(DN) | 15-100 | 50-700 | 15-100 | 50-700 | 300-6000 | 15-100 | 50-700 |
Material | Material | ABS | Special material for H -temp | ||||
Frequency | 1MHz | ||||||
Installation | V ( N/ W ) | V/ Z | V ( N/ W ) | V/ Z | Z | V/ ( N W ) | V/ Z |
Calibration | Calibrated together with flowmeter | ||||||
Magnetic | yes | no | |||||
Temperature | 0-70 | 0-160 | |||||
IP | IP65 | ||||||
Outline size | 200*25*25 | 200*40*40 | 45*30*30 | 60*45*45 | 80*70*55 | 90*85*24 | 90*82*29 |
N.W. g/2pcs | 250 | 1080 | 75 | 250 | 650 | 94 | 150 |
Medium | Water sea water sewage Alcohol oil etc | ||||||
Turbidity≤ | 10000ppm with little air bubble | ||||||
Pipe | Carbon steel stainless steel cast iron Brass PVC Aluminum etc. | ||||||
Pipe liner | Rubber Slurry PP PS bakelite, PTFE | ||||||
Signal cable | standard 5M *2 optional:10M* 2 or 15M* 2 |